incandescent lamp light bulb
60W T10 E26 FR VS 120V
donsbulbs part:
I/120V/60W/E26/T10/FR/HD |
| inventory check: sold out |
I/120V/60W/E26/T10/FR/HD
bulb specifications:
| | | | | | category: |  | Incandescent lamp | | volt: | | 120 | | amp: | | 0.5 | | watt: | | 60 | | base: | | E26 - Edison Medium Screw, 26mm (often referred to as Medium) | | glass: | | T10 | | filament: | | C8 | | fil.res.: | | 240 ohm | | m.o.l.: | | 5.63 inch (143MM) | | i.lumens: | | 745 | | cp: | | 59 | | d.hours: | | 1000 | | notes: | | frosted glass
code:hd
rugged vibration service (heavy duty)
gas:vacuum |  | | | |
|
typical shape of T10 glass envelopes
(not to scale) |
typical shape of C8 filament
(not to scale) |
industry standards for base:
E26 - Edison Medium Screw, 26mm (often referred to as Medium)
(not to scale) |
| Don's grand wisdom: When multiple bulbs are in a circuit; if one bulb burns out, you really should replace all bulbs at same time. This way all bulbs will look the same. Otherwise, mixing "used" bulbs with "new" bulbs (or mixing brands) will each look different (some will be dimmer, some a different shade of color.) For example, automobile headlights and tail-lights must always be replaced in pairs or they will look odd. And, when one bulb is at it's end of life, the other will be near it's end of life too. Keep good working "used" bulbs as emergency spares. |
| Although few specialty light bulbs and sockets are manufactured anymore, I have decent inventories of most types in stock, plus additional sources for nearly everything. All are guaranteed brand new, most being NOS (new old stock). Shelf life is forever. |
| Prices usually rise as inventory is sold off. Website updated daily to reflect current stock and prices. Click add to cart button above, and order at today's prices. |
| I don't guarantee brand (or country) of manufacture, but you are welcome to suggest a preference. If you do require a certain brand or specific country of manufacture; read my general information. |
| I need your help! I'm doing everything possible to provide free accurate bulb data and cross-referencing. If you have additional information or found errors, click here. |
| Thanks to you; donsbulbs is the world's largest resource of bulb data and cross-referencing. |
Definition of light bulb refers to lamp.
Definition of socket refers to lampholder (lamp holder). |
|
I/120V/60W/E26/T10/FR/HD
also known as
Cross-Reference:
60-T10-E26S-FR-VS-120V
60/T10/MED/FR/VS/120V
60T10M/FR/RS120V
60T10MED/FR/VS120V
60W/T10/E26/FR/VS/120V
60WATT-T10-64-INSIDE-FROSTED
60WATT-T10-64-INSIDE-FROSTED-120VOLT
60WATT-T10-CEILING-FAN
60WATT-T10-CEILING-FAN-120VOLT
60WATT-T10-E26S-FROSTED-VS-120VOLT
60WATT-T10-FROSTED-CEILING-FAN-120VOLT
60WATT-T10-FROSTED-VS-120VOLT
17287
18711
22178-8
I/120V/60W/E26/T10/FR/HD
I/120V/60W/E26/T10/FR/HD/1000H
I/120V/60W/E26/T10/FR/VS
I/120V/60W/E26/TUBE/FR/HD
|
|
I/120V/60W/E26/T10/FR/HD
have been found in equipment:
>> no equipment cross-references entered yet << |
|
|
